Active Communication

  • Danish(DK)

Your Shopping Cart  

Your Cart is currently empty.

Member Login  

Register 

The registration process will start when you've decided to buy a product!

Applications and deployment alternatives

How can Com-Servers be integrated in standard display systems e.g. those used in the areas of building services engineering or automation?

In order to remain independent of the wide range of standardized and vendor-specific interface protocols, state-of-the-art display systems use the OPC standard (OLE for Process Control) when
 

How can standard-display Web-IOs, e.g. those used in building services engineering or automation, be integrated?

In order to be independent of the wide range of standardized and vendor-specific interface protocols, state-of-the-art display systems use the OPC standard (OLE for process control) to communicate

 

How can an RFID Server be made accessible over the Internet?

By using TCP/IP, which as a protocol also forms the basis of the entire Internet, from here you can of course use any existing network infrastructure

 

How can a Web thermometer be made accessible via the Internet?

As regards the hardware, the Web thermometer is initially only available in the local Ethernet LAN. By virtue of the use of TCP/IP which, as a protocol, also constitutes the foundation
 

Can dynamic Web pages for the Web-IO be created using Ajax techniques?

There have been dynamic Web techniques for the Web-IO for quite some time already. The same JavaScript mechanisms are used as with Ajax technique.
 

Are there special drivers or controls for accessing the RFID Server from my own programs?

There are no specific drivers necessary for the RFID Server. Communication with the RFID Server takes place using a normal socket connection.

 

How can Com-Servers be integrated in standard display systems e.g. those used in the areas of building services engineering or automation?

In order to remain independent of the wide range of standardized and vendor-specific interface protocols, state-of-the-art display systems use the OPC standard (OLE for Process Control) when

 

How can digital signals be tunneled through the network with two Web-IOs?

With the aid of two Web-IOs in box-to-box mode. Here, the only prerequisite for this operating mode is a TCP / IP connection (e.g. also via the Internet) between the two local networks.
 

How would you tunnel the connection between two serial devices through the network?

By using two Com-Servers in Box-to-Box mode. The only prerequisite for this mode is a TCP/IP connection (e.g. also over the Internet) between the two local networks.

 

How can a Web-IO be made accessible via the Internet?

As regards the hardware, the Com-Server first makes the connected serial end device available in the local Ethernet LAN. Because TCP / IP is used, as a protocol TCP / IP also

 
More Articles...
  • «
  •  Start 
  •  Prev 
  •  1 
  •  2 
  •  Next 
  •  End 
  • »
Page 1 of 2