Active Communication

  • Danish(DK)

Your Shopping Cart  

Your Cart is currently empty.

Member Login  

Register 

The registration process will start when you've decided to buy a product!

Com-Servers

How do I reset the Com-Server to its factory default settings?

  1. The standard way to recreate the factory default settings is by means of the Telnet configuration under port number 1111. After selecting the corresponding menu item in "System-Setup" and then
 

Is there a facility for assigning the IP address via the serial interface without a PC?

If you have a handheld PC (e.g. a palm), you have the facility of assigning the IP address via the integral serial interface of the handheld PC. Suitable terminal programs for handheld PCs can be found
 

How do you prevent in DHCP environments the Com-Server from getting an unintended IP address?

The Com-Server uses the DHCP-compatible BOOTP protocol to avoid this problem. In contrast to DHCP, this is based on fixed (stored in a corresponding database) reservations of certain

 

Why can’t I assign an IP address through the serial port?

  1. The Highspeed series of Com-Servers have serial combination interfaces which can be reconfigured between RS232, RS422 and RS485 via a DIP switch. All other Com-Servers can be optionally
 

Why can’t I assign an IP address using a static entry in the ARP cache?

  • This method can only be used if the Com-Server does not currently have an IP address (see also How do you assign a new IP address to a Com-Server already having an unknown address?).
 

How many IP addresses does a Com-Server having more than one serial port require?

Only one! Which of the serial ports is accessed is determined by which TCP port number is used.
 
More Articles...
Page 2 of 3