Active Communication

IES-2206F

6 10/100TX + 2 100FX with X-Ring Managed Industrial Switch

Lantech Industrial Switch series are designed with four unique hardware features: 

• Able to use option DC power adapter. 
• Terminal block is placed on the bottom of device to isolate dust. 
• Auto detection with DC12V to 48V. 
• Relay contact to connect with alarm system in case of power or port failure.
  

Lantech Industrial Switch series are designed to meet with critical network environment Each of Lantech Industrial Switch is passed under 1.2KVA Hi-Pot abnormal test IP30 enclosure design and test under extensive Industrial EMI and Safety standards.

　Lantech patent-pending feature of "X-Ring" incorporating on Industrial Switch series is to find a auto-recovery-path in 300ms when network is failed over and can be ringed up to twenty(20) Lantech Industrial Switches. Lantech Dual-Homing feature can ensure two X-Ring groups with redundant back up when connected to a backbone switch. Lantech Industrial Switch can set Back-up Masters in X-Ring to ensure the most secure network.

　Lantech IES-2206F is a 6-Port 10/100TX + 2-Port 100FX Industrial Switch with SNMP functionality. The SNMP features are including QoS for 4 queues, 801.q VLAN, IGMP snooping and query mode as well as SNTP and SMTP. Lantech Industrial Switch's relay contact to Alarm system can immediately notify of Power failure and/or Port down events. In case of events, Lantech IES-2206F will immediately send an email to pre-defined addresses.

　Lantech IES-2206F is the best to use in Automation, Transportation, Semi-conductor factory, Heavy Industrial factory and other factory assembly lines.

Features

• 6-port 10/100TX plus 2-port 100FX industrial switch
• RJ-45 port support auto MDI/MDI-X function
• Store-and-Forward Switching Architecture.
• Back-plane (Switching Fabric):1.6Gbps
• 1Mbits Packet Buffer
• 2K MAC address table
• IP-30 Protection
• DIN rail and wall mount design
• Wide-range redundant power design
• Power Polarity Reverse Protect
• Supports IEEE 802.1d Spanning Tree
• Supports IEEE 802.1w Rapid Spanning Tree
• Port Based VLAN
• Supports 802.1Q Tag VLAN
• X-Ring
  → X-ring, Dual Homing, and Couple Ring Topology.
  → Provide redundant backup feature and the recovery time below 300ms.
• Supports IEEE 802.1p Class of Service
  
• Per port provides 4 priority queues
• Port base, Tag Base and Type of Service Priority
• Supports Ingress Packet Filter and Egress Rate Limit.
• Supports Broadcast/Multicast Packet Filter Control
• System Log Server/Client.
• SMTP e-mail Alert
• Relay Alarm Output System Events
• Security
  → IP Security: IP address security
  management to prevent unauthorized
  intruder.
• SNMP Trap
  → Device cold start
  → Power status
  → Authentication failure
  → X-Ring topology changed
  → Port Link up/Link down
• IGMP with Query mode for Multi Media
• TFTP Firmware Update and System Configure Restore/Backup.