Active Communication

IGS-2206C

6 10/100/1000T + 2 10/100/1000T/Dual Speed SFP Combo w/X-Ring Managed Industrial Switch

Lantech Industrial Switch series are designed with three unique hardware features: 1. Redundant power supply design (DC24V-48V) 2. Terminal block is placed on the bottom of device to isolate dust 3. Relay contact to connect with alarm system in case of power or port failure.

Lantech's Industrial Switch series are designed to meet with critical network environment with IP30 enclosure and test under extensive Industrial EMI and Safety standards. Each of Lantech's Industrial Switch is passed under 1.2KVA Hi-Pot abnormal test.

Lantech patent-pending feature of "X-Ring" incorporating on Industrial Switch series is to find a auto-recovery-path in 300ms when network is failed over and can be ringed up to twenty (20) Lantech Industrial Switches. Lantech Dual- Homing feature can ensure two X-Ring groups with redundant back up when connected to a backbone switch. Lantech Industrial Switch can set Back-up Masters in X-Ring to ensure the most secure network.

Lantech IGS-2206C is a 6 10/100/1000T + 2 10/100/1000T/Dual Speed SFP Combo w/X-Ring Managed Industrial Switch with SNMP functionality. The full SNMP features are including QoS for 4 queues, 801.q VLAN, IGMP snooping and query mode as well as SNTP and SMTP. Lantech Industrial Switch's relay contact to Alarm system can immediately notify of Power failure and/or Port down events. In case of events, Lantech IGS-2206C will immediately send an email to pre-defined addresses.

Lantech IGS-2206C is the best to use in Automation, Transportation, Semi-conductor factory, Heavy Industrial factory and other factory assembly lines.

Features

• 6-port 10/100/1000T + 2 10/100/1000T/
  Dual Speed SFP Combo w /X-Ring Managed Industrial Switch. (Total 8 Port Switch)
• RJ-45 Port Support Auto MDI/MDI-X Function.
• Store-and-Forward Switching Architecture.
• Back-plane (Switching Fabric):16Gbps
• 1Mbits Packet Buffer
• 8K MAC address table
• IP-30 Protection.
  
• DIN rail and wall mount design.
• Input Power Isolation Design for Telecom application, Pass Hi-Pot test~1.5KV.
• Wide-range redundant power design.
• Supports IEEE 802.1d Spanning Tree
• Supports IEEE 802.1w Rapid Spanning Tree
• Port Based VLAN
• Supports 802.1Q Tag VLAN
• GVRP
• Double Tag VLAN (Q in Q)*
• Private VLAN**
• X-Ring
  X-ring, Dual Homing, and Couple Ring Topology.
  Provide redundant backup feature and the recovery time below 300ms.
• Port Trunk with LACP
• Supports IEEE 802.1ab LLDP**
• Supports IEEE 802.1p Class of Service
• Per port provides 4 priority queues
• Port base, Tag Base and Type of Service Priority
• Supports Ingress Packet Filter and Egress Rate Limit
• Supports Broadcast/Multicast Packet Filter Control
• Port Mirror: Monitor traffic in switched networks.
  TX Packet only
  RX Packet only
  Both of TX and RX Packet
• System Log Server/Client
• SMTP e-mail Alert
• Relay Alarm Output System Events
• Security
  Port Security: MAC address entries/Filter
  IP Security: IP address security management to prevent unauthorized
  intruder.
  Login Security: IEEE802.1X/RADIUS
• IGMP with Query mode for Multi Media
• TFTP Firmware Update and System Configure Restore/Backup.