81029 Plastic-Fiber Optic Interface RS232, Low Power
Price per Unit (piece):
735,00 DKK
Power-saving version for short distances - Transmission distance 0 to 20 meters.
Application:
PC connection over fiber-optic cables
Background knowledge: Power for the interfaces
With the Interface model described here, a 9-pin special version is available in addition to the other fiber optic compact interfaces. The transmission distance is limited to from 0 to 20m, but the connected RS232 port only sees a load current of approx. 2mA. With this version it is also possible to run on lower power RS232 interfaces without the need for an additional voltage source.
A pin- and function-compatible converter for distances up to 80 meters is available by using Interface model 81009
| Baud rate: |
|
110..115,200 baud |
| Data format: |
|
any format |
| Signal lines: |
|
RxD, TxD (full duplex) |
| Transmission distance: |
|
typically 0...20 meters |
| Power supply: |
|
From the RS232 signals |
| RS232 adapter: |
|
9-pin SUB-D socket for PC |
| Fiber-optic cable adapter: |
|
integrated socket with automatic
interlocking of the fiber-optic cable |
| Fiber-optic medium: |
|
Duplex plastic optical fiber cable
Dimensions 2.2 x 4.4 mm
with a fiber diameter of 1 mm
Material: core: PMMA, cladding: PE |
| Wavelength: |
|
approx. 660 nm |
| Transfer distance: |
|
typically 20 meters |
| Ambient temperature: |
|
Storage: -40..+70°C
Operation: 0..+50°C |
| Housing: |
|
SUB-D adapter housing |
| Weight: |
|
approx. 30 g |
| Delivery: |
|
1x FOC RS232 interface, 9-pin for PC |
Product properties:
- Conversion from RS232 to fiber-optic cable
- Version with reduced power consumption
- Transmission distance up to 20 meters, with longer distances achievable using model 81009.
- Easier installed than any copper cable, thanks to patented FOC adapter
- The interface is very easy to install:
- Cut the fiber-optic cable with a sharp knife at right angles.
- Insert into patented adapter of the W&T interface.
- Plug the adapter into the PC.
- That’s it!
- 100% protection against interfering radiation
- No re-configuration of transmission parameters required
- Electrical isolation
- Lightning protection
- Conforms to standards both in office and industrial environments:
- Increased noise immunity for industrial areas
- Stricter noise emission for residential and commercial areas
Shop 