81210 ST fiber-optic line RS232 interface
Price per Unit (piece):
1.485,00 DKK
Send RxD and TxD over glass fiber optic cable
Application:
Connection of control device to PC by means of fiber-optic cable
Background information:
For data transmission across long distances and/or in extremely interfering environments, we strongly recommend the use of fiber-optic cables. Easily installed connections over relatively short distances up to 100 m are made possible by the use of plastic optical fiber cables, whereas for a distance segment of up to 3800 m, the use of fiber-optic lines is made necessary. The attenuation of the light in fiber-optic lines is considerably lower than that in plastic optical fiber cables.
While, in the past, the installation and preparation of fiber-optic lines was rather difficult, many suppliers now offer a comprehensive service of installation and customizing of cables, due to the fact that fiber-optic technology is now increasingly applied in commercial networks.
| Baud rate: |
|
0..230 kBaud |
| Data format: |
|
any format |
| Transmitted signals: |
|
RxD, TxD |
| Serial connection: |
|
9-pin SUB-D adapter |
| Glass fiber connection: |
|
ST plug adapter
SMA plug adapter on request |
| Fiber-optic medium: |
|
Duplex multimode fiber-optic cable |
| Max. distance: |
|
50/125um: typically 3200m, min. 1400m @3dB/km
62.5/125um: typically 3800m, min. 2200m @3.5dB/km
200um PCS fiber: typically 2500m, min. 1500m @8dB/km |
| Optical budget: |
|
50/125um: typically 9.6dB, min. 4.2dB
62.5/125um: typically 13.4dB, min. 8.0dB
200um PCS fiber: typically 20dB, min 12dB |
| Wavelength: |
|
820 nm |
| Galvanic isolation: |
|
Isolation voltage min. 1 KV DC
between supply and serial connection |
| Power supply: |
|
12..24V DC/AC |
| Current consumption: |
|
max. 150 mA at 12 V input voltage |
| Supply voltage connection: |
|
Plug-in screw terminal, 5.08mm spacing
Labeled "L+" and "M" |
| Ambient temperature: |
|
Storage: -40..+70°C
Operating in non-rowed installation: 0..+60°C
Operating in rowed installation 0..+50°C |
| Permissible relative humidity: |
|
0..95% RH (non-condensing) |
| Housing: |
|
Plastic compact housing, 105x75x22mm |
| Weight: |
|
approx. 100 g |
| Delivery: |
|
1x ST fiber-optic line RS232 interface
Please order power supplies
separately as accessories |
Product properties:
- Transmission of two data channels
- Electrical isolation to almost any extent between the connected devices
- Disruption-free and secure transmission across distances of up to 3800 m
- Extended supply voltage range up to 24V
- Shipped optionally with or without power supply:
Please order power supplies as separate accessories.
- No re-configuration of transmission parameters required
- Top hat rail housing according to DIN EN 50022-35
- Conforms to standards both in office and industrial environments:
- Increased noise immunity for industrial areas
- Stricter noise emission for residential and commercial areas
Shop 
