Active Communication

Lantech IPEC-0101FT Industrial PoE Converter is a slim type Industrial media converter with PoE injector built-in which has a unique DIP switch to adjust 100M duplex mode and LLF(Link Loss Forwarding) function. Through the DIP switch, you can also set Power Alarm and Pure converter mode.

 IPEC-0101FT is designed with PoE injector power feeder function (up to 15.4W) for single port PoE application complying with IEEE802.3af IPEC-0101FT supports EFT protection for 3000VDC power and 6000VDC Ethernet ESD protection.

Lantech’s each UTP to Fiber converter equips LLF (Link Loss Forwarding) function for auto-cut off connection if one end of connection is disconnected. The built-in LFP (Link Loss Forwarding) function for auto-cut off connection if one end of connection is disconnected. The built-in LFP (Link Fault Passthrough) scheme is to cut off Fiber TX or RX when either one has lost connection then trigger LLF to cut off all connection. Smart LLF and LFP function alerts Central side Swith immediate remedy action when connection is lost

 Lantech IPEC-0101FT is the best Industrial PoE converter for extend distance demand where are placed in outdoor or tight space cabinet for various applications like Factory Automation, Building Automation, SCADA, Warehousing, Traffic Control or Video Surveillance.

Features

• System Interface/Performance
  ． UTP to Fiber Media Converter
  ． Built-in 1 port PoE Injector Function
  ． RJ-45 port support Auto MDI/MDI-X Function
  ． Auto Negotiation Speed, Half/Full Duplex
  ． Store-and-Forward Switching Architecture
  ． E model supports -40℃~75℃
  ． Built-in Link Lose Forwarding(LLF) & Link Fault Pass-Through (LFP) Technology
• Power Supply
  ． DC 48V Redundant Power Supply
  ． Overload current resettable Fuse Present
  ． Power Polarity Reverse Protect
• Case/Installation
  ． IP-30 Protection
  ． DIN Rail and Wall Mount Design
• Provides EFT protection 3000 VDC for power line
• Supports 6000 VDC Ethernet ESD protection