Active Communication

IPES-2208C

8 10/100TX + 2 10/100/1000T/Dual Speed SFP Combo w/ 8 PoE Injectors Managed Industrial Switch

Lantech Industrial Switch series are designed with 3 unique hardware features:

• Terminal block is placed on the bottom of device to isolate dust.
• 48V Redundant Power Design. 
• Relay contact to connect with alarm system in case of power or port failure.

Lantech Industrial Switch series are designed to meet with critical network environment Each of Lantech Industrial Switch is passed under 1.2KVA Hi-Pot abnormal test IP30 enclosure design and test under extensive Industrial EMI and Safety standards.

　Lantech patent-pending feature X-Ring is incorporating on Industrial Switch series to find a auto-recovery-path within 300ms, and can be ringed up to twenty (20) Lantech Industrial Switches. Lantech Dual-Homing feature ensures two X-Ring groups with redundant back up when connected to a backbone switch. Lantech Industrial Switch can set Back-up Masters in X-Ring to ensure the most secure network.

　Lantech IPES-2208C is a 8 10/100TX + 2 10/100/1000T/Dual Speed SFP Combo w/8 POE Injectors function. The SFP connection is suitable with 100M and 1000M Dual Speed. The full SNMP features are including QoS for 4 queues, 802.1q VLAN, IGMP snooping and query mode as well as SNTP and SMTP.

　Lantech IPES-2208C is the best to be used in Automation, Transportation, Semi-conductor factory, Heavy Industrial factory and other factory assembly lines where needs PoE functionality.

Features

• 8-port 10/100TX + 2 10/100/1000T Dual Speed SFP Combo w /X-Ring Managed Industrial Switch. (Total 10 Port Switch)
• RJ-45 Port Support Auto MDI/MDI-X Function.
• Embedded 8-port PoE Injector function
• SFP(Mini-GBIC) supports 100/1000 Dual Mode
• Store-and-Forward Switching Architecture
• Back-plane (Switching Fabric): 5.6Gbps
• 1Mbits Packet Buffer.
• IGMP with Snooping and Query mode for Multi Media Application
• 8K MAC address table.
• IP-30 Protection
• DIN rail and wall mount design.
• Redundant Power Design
• Supports IEEE 802.1d Spanning Tree
• Supports IEEE 802.1w Rapid Spanning Tree
• Port Based VLAN
• Supports 802.1Q Tag VLAN
• GVRP
• Double Tag VLAN (Q in Q)*
• Private VLAN**
• X-Ring
  → X-ring, Dual Homing, and Couple Ring Topology.
  → Provide redundant backup feature and the recovery time below 300ms.
• Port Trunk with LACP.
• Supports IEEE 802.1ab LLDP**
• Supports IEEE 802.1p Class of Service
• Per port provides 4 priority queues
• Port base, Tag Base and Type of Service Priority
• Supports Ingress Packet Filter and Egress Rate Limit.
• Supports Broadcast/Multicast Packet Filter Control
• Port Mirror: Monitor traffic in switched networks.
  → TX Packet only
  → RX Packet only
  → Both of TX and RX Packet
• System Log Server/Client.
• SMTP e-mail Alert
• Security
  → Port Security: MAC address entries/Filter
  → IP Security: IP address security management to prevent unauthorized
  intruder.
  → Login Security: IEEE802.1X/RADIUS
• SNMP Trap
  → Device cold start
  → Power status
  → Authentication failure
  → X-ring topology changed
  → Port Link up/Link down
  → PoE port events
• Relay Alarm Output System Events.
• IGMP with Query mode for Multi Media Application
• TFTP Firmware Update and System Configure Restore/Backup