13410 Low Profile PCI card 1x 20mA, 1kV isolated
Price per Unit (piece):
1.260,00 DKK
20mA interface card
with 1kV isolation for Low-Profile PC housing
Application:
PC as PLC programming device
Background information:
"Low Profile" PCI cards have the same electrical properties as their counterparts in standard PCI format. Only the height of the cards is significantly reduced compared with the original size and thus allows the cards to be installed in smaller PCs being offered today. An additional slot bracket of normal size is included for installing Low Profile cards in standard housings.
Additional interface modules are connected to the interface card using 2mm flat ribbon cable and attached to a slot in the PC case. Both components can be ordered as a separate accessory under article number 13014 for the Low-Profile housing and article number 13013 for the Standard housing.
Technical data:
| Number of ports: |
|
1 galvanically isolated 20mA port
3 non-isolated TTL interfaces |
| Operating modes: |
|
suitable for active or passive mode |
| Isolation: |
|
min. 1kV |
| UART: |
|
16950 with 128-byte FIFO |
| Base addresses: |
|
automatic configuration |
| Interrupts: |
|
automatic configuration |
| Baud rate: |
|
50 ..57.600 baud |
| Data format: |
|
any format |
| Signals: |
|
RxD+, RxD-, TxD+, TxD- |
| Serial connection: |
|
9-pin SUB-D adapter |
| Galvanic isolation: |
|
Isolation voltage min. 1 KV DC
between PC and serial port 1 |
| Power supply: |
|
+5V 0.2A |
| Ambient temperature: |
|
Storage: -40..+70°C, Operation: 0..+70°C |
| Permissible relative humidity: |
|
0..95% RH (non-condensing) |
| Dimensions: |
|
122 x 64 mm |
| Weight: |
|
approx. 110 g |
| Delivery: |
|
PCI card 1x 20mA
Slot bracket in standard size
Driver CD |
Product properties:
- Equipping PCs with a switchable active/passive 20mA interface
- Compact size makes it easy to use even in Low Profile systems
- Compatible with PCI2.2 standard, for 5V PCI slots
- 1kV galvanic isolation between interface and PC
- Also with three serial TTL, non-galvanically isolated ports onboard:
usable with W&T interface modules as RS232, RS422, RS485 or 20mA interfaces
- 4 x UART 16950 with 128-byte FIFO
- Plug-and-play: automatic configuration of base address and interrupt
- Includes drivers for Windows 95/98, NT4.0, 2000, XP, 2003, Vista and Server 2008
- Conforms to standards both in office and industrial environments:
- Increased noise immunity for industrial areas
- Stricter noise emission for residential and commercial areas
