11077 Power supply 24V / 100W for DIN rail mounting
Price per Unit (piece):
667,50 DKK
Power supply 24V / 100W for DIN rail mounting
Background information:
W&T Interfaces or Com-Servers are frequently used with a 24V power supply in large numbers at a central location. In such cases a common supply for the interfaces makes the application significantly clearer than would be the case when powering the devices with individual dedicated power supplies.
If there is no large 24V power supply in the installation, this problem can be solved elegantly and cost-effectively using the Model 11077 100W DIN rail power supply, which is capable of powering multiple interfaces or Com-Servers.
The power supply can of course also be used where in addition to the 24V supply for the W&T Interface you also need power for the rest of the installation. In this case you simply need to ensure that the power consumed does not exceed the rated power of the DIN rail power supply.
Thanks to the generous operating temperature range, the DIN rail mount power supply is also ideal for applications where the standard plug-in power supply provided with the Interfaces cannot be used due to the expected high ambient temperatures.
Technical data:
| Output power: |
|
max. 100.8W |
| Efficiency: |
|
typ. 89% |
| |
|
|
| Input voltage: |
|
88..264VAC, 124..370VDC |
| Frequency: |
|
47..63 Hz |
| Input current: |
|
1.6A at 230V AC |
| Inrush: |
|
max. 45A at 230V AC |
| No-load losses: |
|
<1W |
| |
|
|
| Output voltage: |
|
24V DC (settable 24..29V) |
| Tolerance: |
|
+/-1% |
| Ripple: |
|
max. 150mV |
| Rated current: |
|
4.2A |
| Minimum load: |
|
none |
| |
|
|
| Overcurrent limiter: |
|
at 105%..135% of rated current |
| Short circuit protected: |
|
Yes |
| Overvoltage protection: |
|
Shutdown at 30..35V
Reset using POWER ON |
| |
|
|
| Start time: |
|
2700ms at rated load the 230V AC |
| Rise time: |
|
80ms at rated load and 230V AC |
| Voltage bridging: |
|
50ms at rated load and 230V AC |
| |
|
|
| Cooling: |
|
Convection cooling |
| Withstand voltage |
|
In-Out: 3KV AC |
| Isolation resistance: |
|
In-Out: 100 Mohm at 500VDC |
| |
|
|
| Operating temperature: |
|
-20..60°C, power derating
over 45..60°C |
| Storage temperature: |
|
-40..85°C |
| Relative humidity: |
|
Operating: 20..90% relative humidity
Storage: 10..95% relative humidity
(non-condensing) |
| |
|
|
| Adapters: |
|
2-pin input, 4-pin output
with screw terminals |
| MTBF: |
|
>486,000 hours (per
MIL-HDBK-217F at 25° C) |
| |
|
|
| Weight: |
|
300 g |
| Dimensions: |
|
100 x 93 x 56 mm |
| |
|
|
| Approvals: |
|
UL, c-UL, TÜV, CB, CE |
| Safety: |
|
Meets
UL 60950-1 / EN60950-1 |
| EMC: |
|
Meets
EN 55022 B
EN 61000-3-2, EN 61000-3-3
EN 61000-4-2, EN 61000-4-3
EN 61000-4-4, EN 61000-4-5
EN 61000-4-6, EN 61000-4-8
EN 61000-4-11, ENV 50204
EN 61204-3, EN 61000-6-2 |
Product properties:
- Compact 100 Watt power supply for DIN rail mounting
- Flexible in application:
- Generous 100...240V input range
- CE Marking and UL Listed
- High-efficiency: typ. 89%
- Large operating temperature rnage: -20..+60 degrees Celsius
- Compact DIN rail housing: 100 x 93 x 56 mm
- Conforms to standards both in office and industrial environments:
- Increased noise immunity for industrial areas
- Stricter noise emission for residential and commercial areas
|
Shop 
