20001 Centronics Line Driver Set
Price per Unit (piece):
1.675,00 DKK
Centronics Line Driver Set
Operate parallel printers from up to 1000m distance
Availability
Usually ships in:
Bestillingsvare
Application:
Printer up to 1000 m away from PC
Background information:
The printer port is specifically designed for high-transfer rate communication across cables of a length of max. 5 m. Even if the printer is only located next door, a longer cable might be required. When using cables longer than 5 m, incorrect data transfer might occur, which is often due to switching in the 230V power supply system (lamps, fans, elevators). If printers are to be located further away from the PC, both devices must have the same ground potential (grounded contact, or green/yellow ground wire). This is best achieved by laying a separate power supply cable from the power socket of the computer to the printer. To avoid this expenditure, use the Centronics line driver set. The integrated electrical isolation allows for the connection of the two devices to separate power circuits
| Isolation: |
|
min. 500 V |
| Transfer rate: |
|
8 kcps |
| max. distance: |
|
1000 m |
| Power supply: |
|
2 supplied power adapters |
| Input: |
|
36-pin Centronics socket |
| Output: |
|
36-pin Centronics plug
Input module can be plugged in
at the printer |
| Housing: |
|
Plastic housing, 124x74x21mm
Plastic housing, 75x61x20 mm |
| Weight: |
|
approx. 750 g incl. power adapter |
| Delivery: |
|
1 x Centronics line driver set
2 x power adapter for application in office |
Product properties:
- one adapter each at both cable ends
- electrically isolated up to 500V
- printer and computer can be connected to separate power supply circuits.
- indifferent to interfering radiation
- also suitable for industrial environments
- medium transfer rate
- Conforms to standards both in office and industrial environments:
- Increased noise immunity for industrial areas
- Stricter noise emission for residential and commercial areas
Shop 
